NEW! IsoPulse-100 Triggered Stimulus Isolator NEW!

                                No Batteries!

Two Modes of Operation:

Gate TTL- Digital input signal activates preset output level for as long as gate signal is applied.

Trigger TTL- Digital input triggers internal timer for a preset output level for preset time.

The IsoPulse-100 was designed as a full function, Gated, Triggered stimulus isolation unit for using externally generated digital trigger signals. This device is capable of producing switch selected dual polarities for both current and voltage stimulation.

       Active and Overload LED’s indicate to the user the states of operation

SPECIFICATIONS

• Digital input: +5V DC
• Output Current-ranges; +/-.1mA, +/-.5mA +/-1 mA, +/-5mA and +/-l0mA +/-50ma full-scale ranges. (50ma 15% duty cycle)
• Output Voltage ranges; +/-.5 volt, +/-1 volt, +/-5 volt, +/-10 volt, +/-50 volt, and +/-100 volt full scale ranges.
• Output compliance Voltage: +/- 120V
• Linearity- < 1% deviation over entire output range
• Rise and Fall times- 8 microseconds, 1mA through 10Kilohm load
• Source resistance in voltage mode-10Kilohm, 1% tolerance
• Dimensions- 2.7" high x 7.5" wide x 9.7" deep
• External AC power supply (for both input and isolated output stages)

.

IsoPulse-100	100V/10mA Biphasic Stimulus Isolation unit with PS-2 external Power Supply	$1,295.00
PS-1 upgrade	Line operated power supply required for 230 VAC	add  $40.00

Warning: This equipment is not intended for use in human applications or human experimentation
[Home | News | Products | Ordering | Feedback ]

Dagan Corporation Minneapolis MN USA 612-827-5959 (FAX 612 827-6535) Email sales@dagan.com 3/29/05