NEW! IsoMax-100 Biphasic Stimulus Isolator NEW!

                            No Batteries!

Four Modes of Operation:

Analog in Analog Out- Isolated Current or Voltage output tracks input waveform.

Analog in Analog Out with Threshold- Same as above except input must exceed adjustable 10 to 50mV Threshold voltage to activate output.

Gate TTL- Digital input signal activates preset output level for as long as gate signal is applied.

Trigger TTL- Digital input triggers internal timer for a preset output level for preset time. 

The IsoMax-100 was designed as a full function, Gated, Triggered or biphasic analog input analog output stimulus isolation unit for use externally generated analog stimulation signals.. This device is capable of producing biphasic current and voltage stimulation.

SPECIFICATIONS

• Analog Input: +/-10 Volts. 10 Volt input equals full range ouput.
• Digital input: +5V DC
• Output Current-ranges; +/-.05 mA, +/-.1mA, +/-.5mA +/-1 mA, +/-5mA and +/-l0mA full-scale ranges.
• Output Voltage ranges; +/-.5 volt, +/-1 volt, +/-5 volt, +/-10 volt, +/-50 volt, and +/-100 volt full scale ranges.
• Output compliance Voltage: +/- 100V
• Linearity- < 1% deviation over entire output range
• Rise and Fall times- 8 microseconds, 1mA through 10Kilohm load
• Source resistance in voltage mode-10Kilohm, 1% tolerance
• Dimensions- 2.7" high x 7.5" wide x 9.7" deep

External AC power supply (for both input and isolated output stages).

Price:

IsoMax-100	100v/10mA Biphasic Stimulus Isolation unit with PS-2 external Power Supply	$1,980.00
PS-1 upgrade	Line operated power supply for 115, Required for 230 VAC	Add $40.00
EXR	Extended high range to 50mA with limitation of 15% duty cycle	Add $120.00

Warning: This equipment is not intended for use in human applications or human experimentation

[Home | News | Products | Ordering | Feedback ]

Dagan Corporation Minneapolis MN USA 612-827-5959 (FAX 612 827-6535) Email sales@dagan.com 04/05