Pipette Holders & Acessories
Pipette Holders and Parts (BNC size)
| HB120 | Pipette Holder for use with 1.0 to 1.2 mm glass | $ 75.00 |
| HB180 | Universal Pipette Holder for use with 1.0 to 1.8 mm glass | $ 85.00 |
| HB018 | Four "0" rings for Glass end | $ 11.00 |
| HB-002 |
10 Rubber washers for silver wire end (1/8" OD: fits holders purchased after 1/93) | $ 10.00 |
| P832-5 | Extra Set of 5 Gold BNC | $ 12.00 |
| P657-5 | Extra Set of 5 Gold Pins for TEV-200 Bath Headstage | $ 10.00 |
| S010 | Spare Silver Wire 0.010 inch diameter, 10 feet | $ 40.00 |
Accessories
| 15P - 9C | 15 pin Panel to 9 pin Cable Adapter (adapter: newer 15 pin IX2-700, TEV-200 and 8024-15 to older 9 pin instruments) | $ 60.00 |
| 9P - 15C | 9 pin Panel to 15 pin Cable Adapter (adapter: older 9 pin headstages to 15 pin instruments) | $ 60.00 |
| 8011 | Gold mini co-axial connector | $ 45.00 |
| 8012 | Gold mini co-axial connector with 15 cm. co-axial cable | $ 55.00 |
| 8013 | Mini co-axial cable (5 feet) | $ 12.00 |
| 8017 | Universal 9 pin, 3 meter headstage extension cable | $ 75.00 |
| 8018 | Universal 15 pin, 3 meter headstage extension cable | $ 75.00 |
| P657-5 |
Set of 5 Gold male mini pins to
fit EX1/EX4 pin jacks (0.040in dia) |
$10.00 |
| P658-5 |
Set of 5 Gold female mini pin
jacks (assorted colors) (0.040 inside dia) |
$20.00 |
| P832-5 |
Set of 5 Gold BNC
pins (same as used on HB-120 and HB-180 holders) |
$12.00 |
Warning: This equipment is not intended for use in human applications or human experimentation.
[ Home | News | Products | Ordering | Feedback ]
Dagan Corporation Minneapolis MN USA 612-827-5959 (FAX 612-827-6535) Email: info@dagan.com 4/17/08