The CHEM-CLAMP is designed to be a dedicated instrument for Voltammetric and Amperometric Recording. Although the internal design of the CHEM-CLAMP is similar to low noise Patch and Whole cell clamps designed by Dagan Corporation, the price is kept down by including only features needed for Voltammetric and Amperometric Recording.

Filter

100, 300, 1K, 3K, 10K Low Pass Bessel Filter (3 Pole)

Gain/Headstages/
Feedback resistor/
Max current

0.1, 0.2, 0.5, 1, 2, 5, 10, 20 mV/pA     (standard)         N=1 Headstage (100megohm) 100nA max
0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2 mV/pA                     N=0.1 Headstage (10 meghom) 1uA max
0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2 mV/pA   N=0.01  Headstage (1 megohm) 10 uA max
The linear output range of the Chem-Clamp is 10 volts.
Multiply the N Headstage value  by the GAIN value on the front panel to get the actual Gain

Telegraphs

0.4 volts/step output BNC's for both Gain and Filter

10 Turn Dial

Positive or Negative 200mV per-turn, 10 turn control

External

100mV/Volt or 200mV/V front panel BNC. Maximum input 10 volts (+/-1 volt or +/- 2 volts command range)

Meter

Current Monitor +/-19.99 nA

Voltage Monitor +/-1999mV

Cabinet

2.7" high, 7.5" wide, 9.7" deep

Headstage

1.1" high, 1.3" wide, 2.2" deep (3 meter cable)

PS-2 (Standard)

115 VAC, 50/60 Hz, 20 W

PS-1 (Optional)

115 or 230 VAC, 50/60 Hz, 20 W.

CHEM-CLAMP

Voltammeter and Amperometer Voltage Clamp Amplifier with Headstage (specify  N gain, N=1 standard) and PS-2 external Power Supply (115VAC)

$1,495.00

PS-1 upgrade

Line operated power supply required for 230 VAC

Add $90.00

HB-180

Universal Electrode Holder (Mates to Pro-CFE Carbon Fiber Electrodes)

$85.00