The HE-201 and the HE-204 Stages have Dove Tale Grooves running through the base to allow you to place perfusion tubing to pre cool/heat the perfusant to the desired temperature before it enters the bath. The temperature sensing thermistor can be placed in the bath, or on the block via a small mounting hole in the rear. The HCC-100A uses two thermistors, one in the bath, and one in the block.

The HE-204 Stages are designed to be used with specially engineered thermally conductive recording chambers. These Stages takes unique advantage of the superior capabilities of Dagan controllers. The chambers are available for these application are:

• RCP-6T for Perfusion recording
• RCP-10T for Perfusion recording
• RCB-13T for Bilayer recording

HE-200 Series Thermal Stages

HE-201

Thermal Stage (For use with 35mm Petri dish)

$ 890.00

HE-204

Thermal Stage configured for use with Dagan Thermally conductive Recording chambers: RCP-6T, RCP-10T Perfusion, RCB-13T Bilayer or similar 1.35" x 2.0" chamber

$ 890.00

Adapter

Adapter Plate to mate to Microscope Stage (Specify Microscope Manufacturer and Model number). Note: It may be necessary to supply dimensions for some microscope types.

$ 85.00

Optional Accessories

TH- 80

Spare thermistor on 8 foot cable with connector

$ 185.00

TB-316

Replacement PVC tubing: 20 feet of PVC tubing for heat exchanger (ID: 1/8"; OD: 3/16")

$ 9.00

 Temperature Controllers for use with these Stages:

• HCC-100A (high power, dual thermistor)
• DTC-200 (dual channel, single thermistor)
• TC-10 (low cost)

Also See HE-100 Series of.... Thermal Stages