HE-100 series of .... Thermal Stages

 

stage

HE-104R with RCP-10T Recording Chamber

 

Features

BASIC STYLES:

The HE-101 and the HE-104 Stages have two holes running through the base to allow you to run several loops of perfusion tubing to pre cool/heat the perfusant to the desired temperature before it enters the bath. The temperature sensing thermistor can be placed in the bath, or on the block via a small mounting hole in the rear. The HCC-100A uses two thermistors, one in the bath, and one in the block.

The HE-104 Stages are designed to be used with specially engineered thermally conductive recording chambers. These Stages takes unique advantage of the superior capabilities of Dagan controllers. The chambers are available for these application are:

CC-1T for Cut-Open Oocyte recording with the Dagan CA-1B Two Electrode Voltage Clamp (CC-1DT is drilled)

 

he101

he102

he104

 

 

 

HE-100 Series Thermal Stages

HE-101D

Thermal Stage (For use with 35mm Petri dish)

$ 890.00

HE-101S

Thermal Stage (For use with Glass Cover Slip)

$ 890.00

HE-102

Perfusion Thermal Bath ( 2 cubic inch volume)

$ 890.00

HE-104C

Thermal Stage configured to be used with Dagan Thermally conductive Cut-Open Oocyte CC series chambers for the CA-1B Two Electrode Voltage Clamp (or similar 1.35" x 2.0" chamber)

$ 890.00

HE-104R

Thermal Stage configured for use with Dagan Thermally conductive Recording chambers: RCP-6T, RCP-10T Perfusion, RCB-13T Bilayer or similar 1.35" x 2.0" chamber

$ 890.00

Optional Accessories

PS-104

Plastic Stand for the HE-104C

$ 95.00

TH- 80

Spare thermistor on 8 foot cable with connector

$185.00

TB-316

Replacement PVC tubing: 20 feet of PVC tubing (ID: 1/8"; OD: 3/16")

$ 9.00

TB-032

Teflon tubing: 10 feet of Teflon tubing (ID: 0.022"; OD: 0.032") For use with HE-102

$ 9.00

 

 Temperature Controllers for use with these Stages:

Also See HE-200 Series of.... Thermal Stages

he-204

Warning: This equipment is not intended for use in human applications or human experimentation.

[ Home | News | Products | Ordering | Feedback ]

Dagan Corporation Minneapolis MN USA 612-827-5959 (FAX 612-827-6535) Email: info@dagan.com 03/00